Writora

Raymond Garcia · 3d ago

The Busy Person’s Shortcut to Real Filament Choices Explained Skills for Busy People

Everything about Filament choices explained in one place: fundamentals, tools like Nozzle, common traps, and a plan you can actually follow.

Raymond Garcia · 1w ago

Designing Simple Parts: The Questions You Should Be Asking, Backed by Firsthand Experience

A clear, no-fluff walkthrough of diy — the strategies, the mistakes to avoid, and the exact steps that move the needle this year.

Raymond Garcia · 2w ago Member-only

Stop Guessing: The Right Way to Approach Slicer Settings That Just Work (Even If You’re Starting Late)

After testing nearly everything, here’s the honest version: what moved the needle in Slicer settings that just work, what was noise, and where PLA fits in.

Raymond Garcia · 2w ago

Post Processing Basics Deep Dive: Mechanics, Mindsets, Momentum You Can Start This Weekend

The complete picture on slicer: a system you can sustain, a checklist you can print, and the pitfalls that cost most people months.

Raymond Garcia · 3w ago Member-only

The Unwritten Rules of Fixing First Layer Failures

If diy has felt overwhelming, this guide breaks it into small, doable steps you can start today — with real examples and honest advice.

Raymond Garcia · 3w ago

What I Learned About Fixing First Layer Failures After Years of Trial and Error — No Hype, Just Process

A clear, no-fluff walkthrough of 3d printing — the strategies, the mistakes to avoid, and the exact steps that move the needle this year.

Raymond Garcia · 3w ago

The Case for Slower, Better Designing Simple Parts, Backed by Firsthand Experience

Written for busy people: how to make real progress with Designing simple parts in a few focused hours a week — plus the FAQ everyone asks.

Raymond Garcia · 1mo ago

Post Processing Basics in Practice: Three Real Scenarios, Three Outcomes — Without Spending a Dime

If fdm has felt overwhelming, this guide breaks it into small, doable steps you can start today — with real examples and honest advice.

Raymond Garcia · 1mo ago

Designing Simple Parts in 2026: What Actually Works (And What Doesn’t)

A clear, no-fluff walkthrough of fdm — the strategies, the mistakes to avoid, and the exact steps that move the needle this year.

Raymond Garcia · 1mo ago

How to Master Post Processing Basics in 2026 (Step-by-Step) — Without Spending a Dime

If 3d printing has felt overwhelming, this guide breaks it into small, doable steps you can start today — with real examples and honest advice.

Raymond Garcia · 1mo ago

A Skeptic’s Guide to Slicer Settings That Just Work — What Survives Testing — With Real Examples

Written for busy people: how to make real progress with Slicer settings that just work in a few focused hours a week — plus the FAQ everyone asks.

Raymond Garcia · 2mo ago

Filament Choices Explained: What the Top 1% Do Differently — Without Spending a Dime

Written for busy people: how to make real progress with Filament choices explained in a few focused hours a week — plus the FAQ everyone asks.

Raymond Garcia · 2mo ago

How to Build a Post Processing Basics Routine You Won’t Quit for Busy People

Skip the generic advice. This deep dive into Post processing basics covers what genuinely works in 2026, who it works for, and what to do first.

Raymond Garcia · 2mo ago

What Six Months of Serious Your First Printer: A Buyers Guide Taught Me About Systems, Backed by Firsthand Experience

Skip the generic advice. This deep dive into Your first printer: a buyers guide covers what genuinely works in 2026, who it works for, and what to do first.

Raymond Garcia · 2mo ago

The 2026 Playbook for Useful Prints for the Home (Even If You’re Starting Late)

Skip the generic advice. This deep dive into Useful prints for the home covers what genuinely works in 2026, who it works for, and what to do first.

Raymond Garcia · 2mo ago

Useful Prints for the Home: The Fundamentals, The Finishing Moves, The Payoff (Even If You’re Starting Late)

After testing nearly everything, here’s the honest version: what moved the needle in Useful prints for the home, what was noise, and where Ender fits in.

Raymond Garcia · 2mo ago

Maintenance in Twenty Minutes a Month: What Changes at Scale (and What Never Does) — No Hype, Just Process

Everything about Maintenance in twenty minutes a month in one place: fundamentals, tools like Bambu, common traps, and a plan you can actually follow.

Raymond Garcia · 2mo ago

Post Processing Basics: 7 Mistakes Almost Everyone Makes for Busy People

Skip the generic advice. This deep dive into Post processing basics covers what genuinely works in 2026, who it works for, and what to do first.

Raymond Garcia · 2mo ago

Useful Prints for the Home: The Complete 2026 Guide — A Field-Tested Approach

A clear, no-fluff walkthrough of diy — the strategies, the mistakes to avoid, and the exact steps that move the needle this year.

Raymond Garcia · 2mo ago

Slicer Settings That Just Work: An Operator’s Manual for Consistent Progress — A Field-Tested Approach

Everything about Slicer settings that just work in one place: fundamentals, tools like Nozzle, common traps, and a plan you can actually follow.

Raymond Garcia · 3mo ago

The Second-Month Slump in Maintenance in Twenty Minutes a Month — and How Past It

Skip the generic advice. This deep dive into Maintenance in twenty minutes a month covers what genuinely works in 2026, who it works for, and what to do first.

Raymond Garcia · 3mo ago

Your First Printer: A Buyers Guide — Ten Small Decisions That Make or Break Results That Actually Sticks

The complete picture on fdm: a system you can sustain, a checklist you can print, and the pitfalls that cost most people months.

Raymond Garcia · 3mo ago Member-only

Before You Start Useful Prints for the Home, Read This Honest Roadmap — A Field-Tested Approach

An operator’s manual for 3d printing. Fundamentals first, tools second, shortcuts last — the order that actually compounds.

Raymond Garcia · 3mo ago

Filament Choices Explained for Beginners: Your Zero-to-Results Plan for Busy People

An operator’s manual for diy. Fundamentals first, tools second, shortcuts last — the order that actually compounds.

Raymond Garcia · 3mo ago

Your First Printer: A Buyers Guide Made Simple: A Practical Walkthrough

Written for busy people: how to make real progress with Your first printer: a buyers guide in a few focused hours a week — plus the FAQ everyone asks.

Raymond Garcia · 3mo ago

The Minimalist’s Guide to Maintenance in Twenty Minutes a Month — In Just 20 Minutes a Day

Everything about Maintenance in twenty minutes a month in one place: fundamentals, tools like Bambu, common traps, and a plan you can actually follow.

Raymond Garcia · 3mo ago

Slicer Settings That Just Work: From Confused to Competent in One Month (Even If You’re Starting Late)

An operator’s manual for diy. Fundamentals first, tools second, shortcuts last — the order that actually compounds.

Raymond Garcia · 3mo ago

Fixing First Layer Failures: How to Practice Deliberately, Not Just Often — In Just 20 Minutes a Day

An operator’s manual for slicer. Fundamentals first, tools second, shortcuts last — the order that actually compounds.

Raymond Garcia · 4mo ago

Maintenance in Twenty Minutes a Month: Everything You Wish You Knew Sooner — In Just 20 Minutes a Day

Skip the generic advice. This deep dive into Maintenance in twenty minutes a month covers what genuinely works in 2026, who it works for, and what to do first.

Raymond Garcia · 4mo ago

Your First Printer: A Buyers Guide Without Burnout: The Sustainable Approach, Backed by Firsthand Experience

Written for busy people: how to make real progress with Your first printer: a buyers guide in a few focused hours a week — plus the FAQ everyone asks.

Raymond Garcia · 4mo ago

Breaking Down Fixing First Layer Failures Into 15 Minutes a Day — In Just 20 Minutes a Day

Skip the generic advice. This deep dive into Fixing first layer failures covers what genuinely works in 2026, who it works for, and what to do first.

Raymond Garcia · 4mo ago Member-only

Everything I’d Do Differently If I Restarted Designing Simple Parts Today

Skip the generic advice. This deep dive into Designing simple parts covers what genuinely works in 2026, who it works for, and what to do first.

Raymond Garcia · 4mo ago

The One-Weekend Plan to Understand Slicer Settings That Just Work — A Field-Tested Approach

The complete picture on fdm: a system you can sustain, a checklist you can print, and the pitfalls that cost most people months.

Raymond Garcia · 5mo ago Member-only

The Quiet Advantages of Getting Good at Filament Choices Explained — Without Spending a Dime

After testing nearly everything, here’s the honest version: what moved the needle in Filament choices explained, what was noise, and where PLA fits in.

Raymond Garcia · 5mo ago

Designing Simple Parts: Your Anti-Overwhelm Starter Kit That Actually Sticks

A clear, no-fluff walkthrough of 3d printing — the strategies, the mistakes to avoid, and the exact steps that move the needle this year.

Raymond Garcia · 5mo ago

Filament Choices Explained at Warp Speed? No. Filament Choices Explained at Steady Speed? Yes. You Can Start This Weekend

If filament has felt overwhelming, this guide breaks it into small, doable steps you can start today — with real examples and honest advice.

Raymond Garcia · 5mo ago

Raymond Garcia

🗓️ Publishing activity

Stories (40)

The Busy Person’s Shortcut to Real Filament Choices Explained Skills for Busy People

Designing Simple Parts: The Questions You Should Be Asking, Backed by Firsthand Experience

Stop Guessing: The Right Way to Approach Slicer Settings That Just Work (Even If You’re Starting Late)

Post Processing Basics Deep Dive: Mechanics, Mindsets, Momentum You Can Start This Weekend

The Unwritten Rules of Fixing First Layer Failures

What I Learned About Fixing First Layer Failures After Years of Trial and Error — No Hype, Just Process

The Case for Slower, Better Designing Simple Parts, Backed by Firsthand Experience

Post Processing Basics in Practice: Three Real Scenarios, Three Outcomes — Without Spending a Dime

Designing Simple Parts in 2026: What Actually Works (And What Doesn’t)

How to Master Post Processing Basics in 2026 (Step-by-Step) — Without Spending a Dime

A Skeptic’s Guide to Slicer Settings That Just Work — What Survives Testing — With Real Examples

Filament Choices Explained: What the Top 1% Do Differently — Without Spending a Dime

How to Build a Post Processing Basics Routine You Won’t Quit for Busy People

What Six Months of Serious Your First Printer: A Buyers Guide Taught Me About Systems, Backed by Firsthand Experience

The 2026 Playbook for Useful Prints for the Home (Even If You’re Starting Late)

Useful Prints for the Home: The Fundamentals, The Finishing Moves, The Payoff (Even If You’re Starting Late)

Maintenance in Twenty Minutes a Month: What Changes at Scale (and What Never Does) — No Hype, Just Process

Post Processing Basics: 7 Mistakes Almost Everyone Makes for Busy People

Useful Prints for the Home: The Complete 2026 Guide — A Field-Tested Approach

Slicer Settings That Just Work: An Operator’s Manual for Consistent Progress — A Field-Tested Approach

The Second-Month Slump in Maintenance in Twenty Minutes a Month — and How Past It

Your First Printer: A Buyers Guide — Ten Small Decisions That Make or Break Results That Actually Sticks

Before You Start Useful Prints for the Home, Read This Honest Roadmap — A Field-Tested Approach

Filament Choices Explained for Beginners: Your Zero-to-Results Plan for Busy People

Your First Printer: A Buyers Guide Made Simple: A Practical Walkthrough

The Minimalist’s Guide to Maintenance in Twenty Minutes a Month — In Just 20 Minutes a Day

Slicer Settings That Just Work: From Confused to Competent in One Month (Even If You’re Starting Late)

Fixing First Layer Failures: How to Practice Deliberately, Not Just Often — In Just 20 Minutes a Day

Maintenance in Twenty Minutes a Month: Everything You Wish You Knew Sooner — In Just 20 Minutes a Day

Your First Printer: A Buyers Guide Without Burnout: The Sustainable Approach, Backed by Firsthand Experience

Breaking Down Fixing First Layer Failures Into 15 Minutes a Day — In Just 20 Minutes a Day

Everything I’d Do Differently If I Restarted Designing Simple Parts Today

The One-Weekend Plan to Understand Slicer Settings That Just Work — A Field-Tested Approach

The Quiet Advantages of Getting Good at Filament Choices Explained — Without Spending a Dime

Designing Simple Parts: Your Anti-Overwhelm Starter Kit That Actually Sticks

Filament Choices Explained at Warp Speed? No. Filament Choices Explained at Steady Speed? Yes. You Can Start This Weekend

Why Most People Stall at Your First Printer: A Buyers Guide — and the Fix

From Zero to Confident: Maintenance in Twenty Minutes a Month Explained Simply — No Hype, Just Process

From Frustrated to Fluent: A saner Path Through Useful Prints for the Home — With Real Examples

Fixing First Layer Failures: A Calm, Methodical System That Compounds — No Hype, Just Process